Cubit Toolkit
The Cubit Toolkit contains all of the primary components and Smartware required in a sturdy toolbox suitable for repeated use in a classroom or at home environment. All of the components are contained in removable foam trays that protect and organise the components. The kit contains the Cubit Controller, 5 Smartware Sensors, 7 Smartware Output devices, Cubit Racer Chassis, 2 Blue Wheels, Battery, Cables, USB Power Connector, Torx Screwdriver and Screws.
Purchase of the Cubit Toolbox also includes access to 150+ hours of Cubit curriculum, lessons and projects.
The Cubit Controller
The Cubit Controller is the heart of the Cubit system. The Controller has 6 ports for attachment of Cubit Smartware components via the Cubit cables.
The Controller connects to the Cubit Workshop software via Bluetooth and is powered via the via the USB Power Connector.
Cubit Battery
The battery provides system power to the USB Power Connector when the project is not powered via the computer’s USB interface.
USB Power Connector
The USB Power Connector provides the power supply to the Cubit projects via either a computer USB interface or the Cubit Battery.
Temperature Sensor
Measures temperature of different objects or gases using a small chip at the tip of the Smartware’s probe.
Light Sensor
Measures the visible light using a Photodiode located in the window opening of the Smartware.
9 Sensor Array (IMU)
The IMU sensor consists of 3 Accelerometers, 3 Gyroscopes and 3 Magnetometers. Used to measure inertial forces and also known as an Inertial Measurement Unit.
Potentiometer
The Potentiometer converts rotation angle of the shaft to a digital output that can be read by the Controller.
Ultrasonic Distance Sensor
Measures the flight time of high frequency sound waves that bounce back from an object to determine its distance.
Buzzer
A tiny speaker that generates an audible tone. It can be used as an alarm indicator or musical composition.
10 LED Colour Strip Light x 2
LED lights that use Red, Blue and Green lights in combination to create over 15 million types of colours.
Servo Motor x 2
A powerful motor that allows for precise positional rotation up to 190 degrees.
DC Motor x 2
A motor that allows for attaching wheels and other accessories to be turned in both directions ans at various speeds.
Blue Wheels x 2
Wheels are designed to be installed onto the DC Motors.
Cables (150mm/6″ x 6 and 450mm/18″ x 4)
Cables are used for Plug and Play connection between the Controller and Smartware.
Cubit Racer Chassis
The Cubit Racer Chassis provides mounting arrangements for various Smartware and the Controller when building various projects.
© Cubit Education - ABN 61 123 317 279
All Rights Reserved